DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING
E.i.E
Dr. J.Susai Mary
Designation | : | Assistant Professor |
Nature of Employment | : | Regular |
Qualification | : | B.E, M.E, PhD |
Phone | : | |
Email ID | : | susaimary.eie@crescent.education |
Teaching
Educational Background
Programme | Discipline | Institution | Year of Passing |
---|---|---|---|
Ph.D | Electronics and Instrumentation Engineering | B S Abdur Rahman Crescent Institute of Science and Technology | 2020 |
M.E | Process Control and Instrumentation | Annamalai University | 2004 |
B.E | Instrumentation and Control Engineering | Madras University | 2002 |
Teaching Experience
Designation | From | To | Institution |
---|---|---|---|
Assistant Professor | 01.11.2021 | Till date | B.S.Abdur Rahman Crescent Institute of Science & Technology |
Project Engineer | 28.09.2020 | 28.9.2021 | Conserve Solutions Pvt Ltd |
Assistant Professor | 18.06.2008 | 13.04.2010 | Crescent Engineering College |
Lecturer | 27.01.2004 | 05.05.2008 | Hindustan College of Engineering |
Research
Area of Research Interest
- Process Control
- Fault diagnosis
- Automation
Publications
- Susai Mary J, Sai Balaji M. A, Dinakaran D, ‘Hybrid adaptive control of CNC drilling for enhancement of tool life and surface quality’, Insight – Non-Destructive Testing and Condition Monitoring, Volume 65, Number 10, October 2023, pp. 570-578.
- Susai Mary J, Sai Balaji M. A, Dinakaran D, Satishkumar S, Arockia Selvakumar A, “Monitoring and Modeling of Cylindricity error using vibration signals in drilling”, Springer Handbook of Smart Materials, Technologies and Devices, Applications of Industry 4.0, 2022.
- Susai Mary J, Dinakaran D, Sai Balaji M.A, ” Adaptive Control of Tool Wear by Grey Wolf Optimization and Neural Controller in a Drilling Process”, International Journal of Robotics and Automation, Vol.36,
- Mahendran G., Sai Balaji M.A., Susai Mary J, Dinakaran, D, “ Prediction and Modeling of Tool Wear with cutting forces and fine Gaussian support vector Machine in Drilling” Lecture Notes in Mechanical Engineering, pp.421-429,2021.
- J.Susai Mary, M A Sai Balaji, A Krishnakumari, R S Nakandhrakumar, D Dinakaran, “Real time monitoring of drill runout using Least square support vector machine classifer”, Measurement – Journal of the International Measurement Confederation Elsevier, 146, pp.24-34, 2019.
- J.Susai Mary, M A Sai Balaji, D Dinakaran, “Prediction and Geometric Adaptive Control of surface roughness in drilling process”, FME Transactions, 2019.
- J.Susai Mary, U Sabura Banu, D Dinakaran and R S Nakandhrakumar, “Adaptive control by multi-objective optimisation for drilling process with fuzzy inference system and neural predictive controller” Insight – Non-Destructive Testing & Condition Monitoring, The Journal of the British Institute of Non-Destructive Testing, Vol.59, No 1, Jan 2017.
- J.Susai Mary, U.Sabura Banu, D.Dinakaran, “Adaptive optimization using Grey relational analysis and PID control of CNC drilling process” IEEE digital explore, 2015.
Conference Papers
- Abdul Jaleel, M.M., Syed Suhail Aziz, P., Hemavathy, P.R., Susai Mary, J., Venusamy, K., IoT based Smart Energy Consumption and Monitoring System, Proceedings – 2023 3rd International Conference on Pervasive Computing and Social Networking, ICPCSN 2023, 2023, pp. 956–961
- Abdul Khader Thaqib A, Tamesh E, Hemavathy P R, J Susai Mary, ‘Integer and Fractional order model based PID control design for a spherical tank process’ in 5th International conference on Recent Innovations in Science and Technology on 7th and 8th April 2023.
- J Susai Mary, P R Hemavathy, M Abdul Rahman, Mohamed Thahseen ‘ IoT based monitoring, prediction and control of pH in waste water treatment plants’ in RACEEE on 16th February 2023.
- M.Suganya, J. Susai Mary, U. Sabura Banu, “Dynamic Matrix control for DC servo motor in CNC machine”, National Conference on Recent Trends In Instrumentation and Control (RTIC-2015), Department of Instrumentation Engineering Madras Institute of Technology, 13 – 14thMarch, 2015, pp.126-130
- P.R. Hemavathy, J. Susai Mary, U. Sabura Banu, Uwaiz Ahmed “Model Reference Adaptive Control for pH Control of a Desalination Plant”, National Conference on Water Treatment, Reuse, Modeling and Control of Desalination Process, Easwari Engineering College, Chennai, 24-25 September 2014.
- U.Sabura Banu, P.R.Hemavathy, J.Susai Mary “Fractional Order PID Controller optimized using Bacterial Foraging Technique for Three Interacting Tank Process considered as a third order process’’ National Conference on Computational Intelligence for Engineering Quality Software CiQS 2014, Coimbatore Institute of Technology, Coimbatore, 21stAugust 2014.
- J.Susai Mary, U. Sabura Banu, Benazir Fathima, “Fuzzy Gain scheduled state feedback control of a three interacting tank system using LQR”, National conference on Recent Trends in Instrumentation and Control for Industrial applications, RMK Engineering College, Chennai, 21st April 2014
- J.Susai Mary, A.Srinivasan, “Identification and control of Nonlinear dynamic systems using Relay feedback method” Proceedings of CISCON Manipal Institute of Technology , Nov.2006
- J.Susai Mary, D.Dinakaran, T.Jeyapoovan, Kathija Kathoon “Nano Machining system” Proceedings of AIME, JMI Central University, New Delhi, Jan.2006
- J.Susai Mary, D.Dinakaran, Kathija Kathoon “Nano Grooving in IC Chips” Proceedings of RAIN , Noorul Islam College of Engineering, March 2006.
FDP/Workshops/Seminar attended
- Completed one-week faculty development programme on ‘How to create your own MOOCS’ from Teaching Learning Centre, Ramanujan College University of Delhi, from 15th-21st June 2023.
- Completed one-month Orientation programme from Teaching Learning Centre, Ramanujan College University of Delhi, from 20th September to 19th October 2022.
- Completed NPTEL online 12 weeks course in ‘Chemical Process Instrumentation’ in Jan –April 2022.
- Completed one week faculty development programme on ‘ Industrial Automation using PLC Programming’ from ATAL academy, from 7th to 11th February 2022.
- Completed a MOOC course on ‘Innovation Through Design: Think, Make, Break, Repeat’ in Coursera platform in February 2022.
- International conference on Robotics, Automation and Non-destructive Evaluation (RANE 2019) organized by Hindustan Institute of Technology and Science, 29-30 August 2019.
- International conference on Robotics, Automation and Non-destructive Evaluation (RANE 2018) organized by Hindustan Institute of Technology and Science, 19-20 July 2018.
- One-day workshop on ‘Multivariable Process Control’ at B S Abdur Rahman Crescent Institute of Science and Technology on 22 September 2017.
- Faculty Development Programme on ‘Artificial Intelligence & Fuzzy Logic for Engineering Applications’ at Hindustan Institute of Technology and Science, 10-13 January 2017.
- Two-day workshop on “Research Methodology & Quality Assurance” organized by the Office of Dean (AR) B.S. Abdur Rahman Institute of Science and Technology on 2nd& 3rd December 2016.
- International conference on Robotics, Automation Control and Embedded systems (RACE 2015) organized by Department of Electronics and Instrumentation, Hindustan Institute of Technology and Science, 18-20 February 2015.
- One-day workshop on ‘Quality Assurance in Academic & Sponsored Research’ organized by the Office of Dean (AR) B.S. Abdur Rahman Institute of Science and Technology on 07.03.2015.
- One-day seminar on “Fractional Order Modeling and Control” at B.S. Abdur Rahman Institute of Science and Technology on 27th August 2013.
- Workshop on ‘System identification and Control’ organized by ICE department, B.S.A Crescent Engineering College on 22.08.2008.
- National level workshop on ‘Controllers for complex systems’ organized by St.Josephs College of Engineering on 13.08.2008
- One-week training program on ‘PLC and SCADA’ by Yokagawa Pvt Ltd, Bangalore Aug 2005
- Two-day seminar on ‘Emerging Trends in Nano Technology’ organized by IEEE at Hindustan College of Engineering, Nov 2006
- Two days Training program on ‘Counseling and Guidance’ organized by NTTTR at Hindustan College of Engineering, Nov 2005
- Three days Training program on ‘Creative Communication Skill Development Program’ conducted by Dr.Sumathinarayanan organized by Hindustan College of Engineering, Sep 2005
- One-day seminar on ‘Recent trends in process automation’ organized by Madras Institute of Technology on 18.02.2005