Dr. S. Rasool Mohideen

Teaching

Educational Background

Work Experience

Lecture courses

• Theory of Machines
• Engineering Mechanics
• Mechanics of Solids
• Finite Element Method
• Machine Design
• Quality Control and Reliability Engineering
• Materials Engineering (Basic and Advanced)
• Production Technology
• Engineering Graphics

Research

Areas Of Research Interest

• Wire Arc Additive Manufacturing (WAAM)
• Cryogenic Treatment
• Welding Metallurgy
• Fracture Analysis
• Finite Element Analysis

Research Publications

International Journal / National Journal/International Conferences / National Conferences/Seminars / Workshops

• Emmanuel Agbo Tei, Rasool Mohideen S, S.Mohamed Illyas, Muthu Manokar A*, “Experimental investigation of inclined solar still with and without sand as energy storage materials”, Journal of Energy Storage, ISSN: 2352-152X, , Elsevier, Impact Factor: 9.4,  CiteScore: 10.3.
• Emmanuel Agbo Tei, Rasool Mohideen S, Muthu Manokar A*, Aakash Srinivasan G,  “Enhancing the performance of a conventional solar still using sensible heat energy storage materials”, Environmental Science and Pollution Research, ISSN:1614-7499, Springer, Impact Factor: 5.8,  Volume-30, pages 39121–39130, March 2023, https://doi.org/10.1007/s11356-022-24859-9
• Mohd Durvesh Mohiuddin, S. Rasool Mohideen, Electrochemical corrosion analysis of wire arc additive manufactured rotor steel weldments subjected to heat treatment, Chemical Data Collections, Volume 43,2023,100986. https://doi.org/10.1016/j.cdc.2022.100986.
• M Prashanth, R Karunanithi, SR Mohideen, S Sivasankaran, M Vlahović, A comparative study on X-ray peak broadening analysis of mechanically alloyed Al2O3 particles dispersion strengthened Al 7017 alloy. Materials Chemistry and Physics 294, 2023 127015.
• ZF Syed, TR Tamilarasan, SR Mohideen, SM Sanjana, Optimization of Wear Parameters of Cryogenic and Heat-treated Al 6101 Closed-cell Foam using Taguchi Technique, Indian Journal of Science and Technology 15 (48), 2022, 2765-2776.
• JP Daniel, GM RG, SR Mohideen, Low Velocity Impact Strength of Cryogenic Treated Glass-Carbon Fiber Reinforced Composite Panels, SAE Technical Paper, 2022.
• Z. F. Syed, T. R. Tamilarasan, S. R. Mohideen, M. S. Dennison, J. Venkatesan and S. Natarajan, “Investigation of Compression Test Parameters of Cryogenic and Heat Treated Al6101 Closed Cell Foam by ANSYS Workbench,” 2022 ASU International Conference in Emerging Technologies for Sustainability and Intelligent Systems (ICETSIS), Manama, Bahrain, 2022, pp. 79-85, doi: 10.1109/ICETSIS55481.2022.9888916.
• Mohd Durvesh Mohiuddin, S. Rasool Mohideen, Investigation on the fracture behaviour of wire arc additive manufactured rotor steel weldments after heat treatment, Theoretical and Applied Fracture Mechanics, Volume 119,2022, DOI: https://doi.org /10.1016/ j.tafmec. 2022. 103342.
• Ahmed KA, Mohideen SHR, Balaji MAS, Sethupathy PB. Synergic effect of metallic fillers as heat dissipaters in the tribological performance of a nonasbestos disk brake pad. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2022;236(2):292-301. doi:10.1177/13506501211018953
• Prashanth, M., Karunanithi, R., Mohideen, S.R. et al. Effect of Al2O3/Y2O3 in AA 7017 matrix nanocomposites on phase formation, microstructures and mechanical behavior synthesized by mechanical alloying and hot-pressing techniques. Appl. Phys. A 128, 85 (2022). https://doi.org/10.1007/s00339-021-05213-1
• Mohd Durvesh Mohiuddin, S Rasool Mohideen, Toughness Property Evaluation of Additive Welded Low Carbon Steel Weldments, Springer Lecture Notes in Mechanical Engineering, Advances in Design and Thermal Systems: Select Proceedings of ETDMMT 2020,431-439.
• Syed, Zeenath Fathima, T. R. Tamilarasan, S. Rasool Mohideen, and Milon Selvam Dennison. “Impact Strength Characterization of Closed-cell Aluminium foam (AL003860) subjected to Cryogenic treatments.” Design Engineering (2021): 15949-15954.
• M. Prashanth, R. Karunanithi, S. Rasool Mohideen, S. Sivasankaran, An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing, Materials Characterization, Volume 171, 2021,110803. ,DOI: https://doi.org/10.1016/j.matchar.2020.110803.
• K Asrar Ahmed, S Rasool Mohideen, MAS Balaji, B Surya Rajan, Tribological performance of brass powder with different copper and zinc content in the brake pad Tribology in Industry Volume 42 (2), 2020, 177.
• Zeenath Fathima Syed, TR Tamilarasan, S Rasool Mohideen, Milon Selvam Dennison, Mechanical properties and surface characterisation of aluminium foam made of Al 6101 subjected to cryogenic treatment-a comparative study,  International Journal of Materials Engineering Innovation,  Volume 11 (3), 2020, 244-263.
• Ramalingam S, Rasool Mohideen S, Sounder Rajan S, Sridhar P S, “Experimental Validation of Hybrid Polymer Composite Material Robotic Single Link Flexible Manipulator”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), Scopus indexed, ISSN: 2278-3075, Vol.9, Issue.3, pp.484-494, 2020. DOI: 10.35940/ijitee.C8461.019320.
• Ramalingam S, Rasool Mohideen S, “composite materials for advanced flexible link robotic manipulators: an Investigation”, International Journal of Ambient Energy, (Scopus, WoS Indexed with impact factor of the journal is 0.36, Published in the  Taylor and Francis Publication),http//doi.org/10.1080/01430750.2019.1613263.
• Ramalingam S, Rasool Mohideen S, “Numerical Analysis of Robotic Manipulator subject to Mechanical Flexibility by Lagrangian-Method”, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences (Scopus Indexed, impact factor is 0.754, Springer Nature Publication), DOI:10.1007/s040010-019-00619-2.
• Ramalingam S, Rasool Mohideen S, “Advanced structural fiber material for single link robotic manipulator simulation analysis with flexibility”, Journal of Automation, Mobile Robotics & Intelligent systems, Scopus indexed, vol.13, No.4,2019. DOI: 10.14313/JAMRIS/4-2019/36.
• Ramalingam S, Rasool Mohideen S, “Hybrid polymer composite flexible multi-link robotic manipulator simulation analysis”, International Journal of Recent Technology and Engineering (IJRTE), (Scopus indexed), ISSN: 2277- 3878 (on-line version), URL http//www. ijrte.eu, special issue, volume 7, issue – 6S2, April 2019, pp.122 -126.
• Ramalingam S, Rasool Mohideen S, Sridhar P S, “Composite Material Robot Manipulator with Joint Flexibility- Mode and Mode Shape Simulation”, International Journal of Recent Technology and Engineering (IJRTE), Scopus indexed, ISSN: 2277- 3878 (on-line version), URL http//www. ijrte.eu, Vol.8 Issue.4, PP.902-909, 2019. DOI:10.35940/ijrte. D7513.118419
• BS Rajan, MA Saibalaji, SR Mohideen, Tribological performance evaluation of epoxy modified Phenolic FC reinforced with chemically modified Prosopis Juliflora bark fiber, Materials Research Express 6 (7), 2019,
• Ramalingam S, Rasool Mohideen S, Manigandan S, Pram Anand T P, “Hybrid polymer composite material for robotic manipulator subject to single link flexibility”, International Journal of Ambient Energy (Scopus, WoS Indexed with impact factor is 0.36, (Taylor and Francis), http//doi.org/10.1080/01430750.2018.1557551.
• MP Ahmed, HS Jailani, SR Mohideen, A Rajadurai, Effect of Cryogenic Treatment on Microstructure and Properties of CuBe2, Metallography, Microstructure, and Analysis 5 (6), 528-535, 4, 2016.
• SR Mohideen, S Thamizhmanii, MMMA Fatah, WNW Saidin, Numerical Fracture Analysis of Cryogenically Treated Alloy Steel Weldments, IOP Conference Series: Materials Science and Engineering 114 (1), 012130, 2016.
• N Mohamad Noor, H Samekto, AR Yusoff, R Mohideen, NI Kasim, N Musa, Investigation on Elastic Behaviour of DP800 Dual Phase Steel, Advanced Materials Research 1134, 109-115, 2016.
• S Thamizhmanii, R Mohideen, A Mujahid, A Zaidi, S Hasan, Solid state friction stir welding using square groove butt joint, Journal of Achievements in Materials and Manufacturing Engineering 73 (2 ) 2015.
• S Thamizhmanii, R Mohideen, AMA Zaidi, S Hasan, Surface roughness and tool wear on cryogenic treated CBN insert on titanium and Inconel 718 alloy steel, IOP Conference Series: Materials Science and Engineering 100 (1), 012015.
• SR Mohideen, A Mujahid, A Zaidi, A Shohaimi, S Ravi, “Metallographic Investigation on the Effect of Cryogenic Temperature on Steel Weldments”, Applied Mechanics and Materials, Vol. 629, 2014,  456-460.
• NA Mohd Adnan, W Saidin, WA Najmuddin, MA Musa, A Zaidi, A Mujahid, “Mechanical Performance of Coconut Coir Fibre Reinforced Urea Formaldehyde Composites”, Australian Journal of Basic & Applied Sciences 8 (15), 2014.
• HaiderNasreen, S. Beer Mohamed, S. Rasool Mohideen, “ Microstructural Analysis and Wear Behavior of Cryogenically Treated Ti-6Al-4V Alloy”, Applied Mechanics and Materials, Vol. 594, 2014, p1331.
• Mohd Thouseef, Rasool Mohideen and NasreenKaleem, “Material Characterization of 316 L stainless steel after subjected to Cryogenic Treatment”, International Journal of Mechanical and Industrial Engineering, Vol.2 (1) 2012.
• S.Thamizhmaniia, Rajendran*, Rasool Mohideen* and Sulaiman , “Investigation on Surface Integrity on STAVAX ESR AISI 420 Martensitic Stainless Steel by Cryogenically Treated Steel Balls with Low Plastic Burnishing Tool”, Key Engineering Materials Vol. 504-506 (2012) pp 1347-1352.
• S.Thamizhmaniia, Rajendran*, Rasool Mohideen* and Sulaimana , “ Performance Evaluation of Cryogenically Treated Worn CBN Insert by Turning Process”Key Engineering Materials Vol. 504-506 (2012) pp 1323-1328.
• Rasool Mohideen. S, Mohd Shukri Mohd Aripin, S.Thamizhmanii, Sulaiman Bin Hasan and Dan Sathiaraj , “Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite”, Advanced Materials Research, Vol. 383-390 (2012) pp 3320-3324.
• S. Rasool Mohideen, Ahmad Mujahid Ahmad Zaidi, “Investigation on Fracture Behavior of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”,  International Journal of Advances in Mechanics and Applications of Industrial Materials, Vol. 1  (1) 2010.
• S.Mazhan, A.M.Ahmed Zaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Study on Sound Absorption Properties of Coconut Coir Fiber Reinforced Composite with Added Recycled Rubber ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21.
• S.Mazhan, A.M.Ahmed Zaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Mecahnical Properties of Medium Density Fiber board Composite Material Using Recycled Rubber and Coconut Coir”, ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21.
• S Rasool Mohideen, A.M.Ahmaed Zaidi, “Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p9.
• Ahmed Mujahid A Z , Mohd Imran Gazali, S Rasool Mohideen, RamlathulRaliah, “ Influence of Cutting Parameters in the High Speed Ball Node End Mill”, Journal of Modern Applied Science,Canada, 2009 Vol.3, (12)
• A.M.Ahmad Zaidi, M.M.Md. Asif, I Abdur Rahman, S. Rasool Mohideen, A.F.Ahmad Zaidi, N.H.Ahmad Zaidi and M.S. Yusof, “ Finite Element Simulation on Crack Analysis of a Thick Tube”, Int. Journal of Integrated Engineering, 2009, Vol 1 (1), p 67.
• S. Rasool Mohideen. K. Angamuthu, G. Thanigaiyarasu and R. Rajendran, “ Investigation on the Toughness of Steel Weldments Subjected to Deep Cryogenic Treatyment  using Notched  Tensile Specimen”, Journal of Manufacturing Technology Today, July, 2009
• S. Mohamed Nazeer, M.Murugan, S.Rasool Mohideen, YVN Narasimmamurthy “Effect of Long Cycle Cryogenic Treatment on Mechanical Properties of 2.25 Cr steel weldments”, Journal of Manufacturing Technology Today, Dec,2007.
• S. Rasool Mohideen, “Adaptive Response Forecasting for a Highly Fluctuating Consumption Pattern of Spares”. Journal of Institution of Engineers, 1997,Vol 78, p71.

Papers Presented in conferences:

• Emmanuel Agbo Tei, Rasool Mohideen, Sivakumar V, A. Muthu Manokar*, “An experimental investigation on the effects of water depth on the thermal efficiency, exergy efficiency, and exergy losses of solar still with and without silicon carbide”, SIMEE 2023: The Second International Conference on Materials, Energy and Environment, 23-24 oct. 2023 El Oued, Algeria.
• Emmanuel Agbo Tei, Rasool Mohideen S., Muthu Manokar A, Aakash Srinivasan G, Enhancing the performance of a conventional single slope solar still using sensible heat energy storage materials, International Conference on Innovations in Thermo-Fluid Engineering and Sciences    [ICITFES-2020] (Paper ID 13847) ICITFES-2020, 10-12 February 2020, National Institute of Technology Rourkela.
• Ramalingam S, Rasool Mohideen S, “Hybrid polymer composite flexible link robotic manipulator simulation analysis”, International Conference on Safe Bio Pack-2018 held on 24-26 July at MIGHT, Cyberjaya, Malaysia.
• Ramalingam S, Rasool Mohideen S, “Hybrid polymer composite flexible robotic manipulator simulation analysis”, National Conference “RTDME 2018” held on 1st and 2nd March 2018 at Anand Institute of Higher Technology (Affiliated to Anna University), Chennai.
• Ramalingam S, Rasool Mohideen S, “Numerical analysis of robotic manipulator   subject to Mechanical flexibility”, 6th National Conference “NCHSM 2018” held on 24-26 July at SRM Institute of Science and Technology, Chennai.
• Mohd Durvesh Mohiuddin and  S.Rasool Mohideen,  Material Characterization of Additive Welded Mild Steel Weldment, International Symposium On Joining Of Materials, April 27 & 28, 2018 (SOJOM 2018).
• Nithya, V Kumarakrishnan, S Ravi, SR Mohideen, High performance tiny capacitor development using MATLAB for harmonic elimination in symmetrical full bridge circuit Soft-Computing and Networks Security (ICSNS), 2015 International Conference,12015
• Pervaz Ahmed M, Siddhi Jailani H. and Rasool Mohideen S., “Effect of cryogenic treatment on Copper beryllium alloy”, International Conference on Advances in Design & Manufacturing, ICAD&M-14, NIT Trichy, 4-6 Dec. 2014.
• Haider Nasreen, S. Beer Mohamed, S. Rasool Mohideen, “ Microstructural Analysis and Wear Behavior of Cryogenically Treated Ti-6Al-4V Alloy”, International Mechanical Engineering Congress, NIT, Trichy, India, June 2014.
• N. Ram Kumar, Vela Murali, A. ArockiaJulias and S. Rasool Mohideen, “Experimental Investigation On Mode-I Fracture Toughness Of Low Temperature Treated Glass/Carbon Hybrid Composite Laminates”, International Conference on Sustainable Manufacturing, ICSM 2013,India, July 2013, pp 357-362.
• Rasool Mohaideen, HyderNasreen, Jefrey, ” Effect  of Cryogenics treatment on Titanium alloys”, International Conference on Engineering Materials and processes. ICEMAP-2013, 23rd &24th May 2013,India Pg-125.
• Mohd Thouseef, Rasool Mohideen and NasreenKaleem, Material Characterization of 316 L stainless steel after subje ted to Cryogenic Treatment, International Conference on Mechanical and Industrial Engineering, ICMIE, Goa, 6th May , 2012.
• Rasool Mohideen. S , Mohd Shukri Mohd Aripin, S.Thamizhmanii, Sulaiman Bin Hasan and Dan Sathiaraj, “Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite”, International Conference on Manufacturing Science and Technology, Kuala Lumpur, Malaysia, December, 2010.
• S. Rasool Mohideen and Nor Azalli Bin Azmir, “ Metallographic Examination Of Cryogenically Treated Steel Weldments”, Malaysian Metallurgical Conference, December 2009.
• S. Rasool Mohideen, Ahmad Mujahid Ahmad Zaidi, “Investigation on Fracture Behaviour of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”,  AES- ATEMA 2009 Conference ,Hamburg, Germany , September 2009.
• Selvakumar. A.S., PrinceArockia Doss. S, Rasool Mohideen. S, ‘Evaluation of Tube Formability by Hydro Forming Technique’, Total Engineering, Analysis and Manufacturing Technologies Conference , Indian Institute of Science, Bangalore, 2008.
• S. Mohamed Nazeer, M.Murugan, S.Rasool Mohideen, YVN Narasimmamurthy “Microstructural Changes due to Cryogenic Treatment on Mechanical Properties of 2.25 Cr steel Weldments”, APDMM 2008.
• M. Karthikeyan and S. Rasool Mohideen, “ Cryogenic treatment of Cutting Tools”, National Conference on the Effect of Information technology on Manufacturing, March 2006.
• RadhaBalaji and S. Rasool Mohideen, ” Analysis of Automatic Injection timing in Diesel Fuel Injection Pump”, National Conference in Advances in Manufacturing and resource Analysis”, April 2006.
• T.P. Gopalakrishnan and S. Rasool Mohideen, “Analysis of Brake Hose Sleeve and generation of Parametric Modeling for Brake Hose Assembly”, National Conference on Recent Trends in Manufacturing and Thermal Engineering, April,2006.          
•  S. Rasool Mohideen, G. Thanigaiyarasu and K. Angamuthu, “Effect of Stress relieving on the Fracture toughness of rotor Steel Weldments. Part I residual Stress Analysis”, Proceedings of All India Seminar on Self Reliance In Materials and Machines, MAT MACH2003, March 2003,P47-58.
• S. Rasool Mohideen, G. Thanigaiyarasu and K. Angamuthu, “Influence of Residual Stress on the Notch Toughness of Rotor Steel Weldments’, Proceedings of National Symposium of Research Scholars(NSRS-4) on Metals and Materials, September 2002.
• Rasool Mohideen. S, Angamuthu. K and Thanigaiyarasu.G, “Evaluation of Weld Build up Repair Weldability of Aged Cr-Mo Steels”, Proceedings of 12th ISME conference, January 2001,P292-295.

Books / Book Chapters:

• Zeenath Fathima, S., Tamilarasan, T.R., Rasool Mohideen, S., Dennison, M.S., Venkatesan, J. (2021). The Effect of Novel Cryogenic Treatment in the Microstructure Analysis of Al 6101 Closed-Cell Foam. In: Ganippa, L., Karthikeyan, R., Muralidharan, V. (eds) Advances in Design and Thermal Systems . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-33-6428-8_2
• Mohiuddin, M.D., Mohideen, S.R. (2021). Toughness Property Evaluation of Additive Welded Low Carbon Steel Weldments. In: Ganippa, L., Karthikeyan, R., Muralidharan, V. (eds) Advances in Design and Thermal Systems . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-33-6428-8_35
• Prashanth, M., Karunanithi, R., Rasool Mohideen, S., Karthik, A., Rout, P.K. (2021). Microstructural Evolution, Phase Formation and Mechanical Behaviour of Al 7017 Alloy Produced by Powder Metallurgy (P/M) Technique. In: Ganippa, L., Karthikeyan, R., Muralidharan, V. (eds) Advances in Design and Thermal Systems . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-33-6428-8_6
• Editor for the Proceedings of 12th Indian Society of Mechanical Engineers (ISME) Conference, January 2001.
• Editor for the Proceedings of the National Conference in Advances in Product Design, materials and manufacturing Engineering, January 2008.

Ph.D. Guidance:

Patents Details:

Conferences Organized:

• XII ISME 2001: 12th Conference for Indian Society of Mechanical Engineers (ISME), organized during January 2001.
• APDMM 2008: National Conference on Advances in Product Design, Materials & Manufacturing Engineering organized during 24th & 25th Jan 2008.
• ADMMS 2017: International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility organized during July 19-21, 2017.
• ETDMMT 2020: Virtual International Conference on Emerging Trends in Design, Manufacturing, Materials, and Thermal Sciences, organized during September, 24th  and 25th, 2020.

Extension

Additional Responsibilities

• Member of Budget and Cost Committee
• Member of Internal Compliance Committee
• Member of Academic Council
• Member for Research Board
• Member of Board of Studies
• Member of Department Academic Audit